(603)-742-8812
Established In 1981
Classified Advertising
Ford 312 Marine Engine RH Rotation with mounts $5,400
Block casting# C2AE 60150
$5400.00

All components have been thermally cleaned, shot blasted & magnafluxed
The cylinder block has been resized & diamond honed .030. As well as decked & squared. All new cam bearings & brass core plugs.

The crankshaft has been magnafluxed, ground & radiused Mains 010 / Rods 010. All of the connecting rods have all been magnafluxed, pin bushings replaced & sized. Connecting rod big end has been resized.

The cylinder heads have been magnafluxed, resurfaced, hardened exhaust valve seat installed for a no lead conversion, valve guides, new springs and valves.

The manifolds & risers have been thermally cleaned, pressure tested, & shot blasted.

New or rebuilt components include;
New alternator
Rebuilt starter
Carburetors rebuilt
Sherwood raw water pump m10270 p3
Rebuilt Mallory YL distributor
Rebuilt fuel pump
All new tune up (plugs, wires, rotor, cap)
Sealed Power pistons – 1031P - 30
Sealed Power moly ring set - E175K 30
Federal Mogul rod bearings 8-2000cpa-10
Federal Mogul m bearings 963m-10
Federal Mogul c bearing 1160m
Pioneer brass core plug kit pe-111b
Sealed Power intake valve v1285
Sealed Power exhaust valve v1127
K-Line bronze valve guide insert
SBI valve spring 160-1120
Federal Mogul piston pin bushing 1834v
Custom marine gasket set

Front viewSerial NumberRotoation & c.i.d.Rear ViewR.H. View
email me